ASCII file generated by GX700 SoundStation v3.1
Current Web Site: http://grunw.hypermart.net/
_______________________________________________

Bank Name: Demo bank for SndStn v3.0
Author/s: Sergio Fumaña Grünwaldt

Comments/description: 
////////////////////////////////////////////////
/ This is the same demo file as with the 2.x   / 
/ versions but in the new LB7 format.          /
////////////////////////////////////////////////

If you plan to share your banks I recommend you to fill this field with
the equipment you use and all the things you consider important about
your banks. 2000 chars allowed here, space enough.

This data is "locked" so you can't change it, it's your choice if you
want to use this in your own banks.
You may have this question...

Have you just 12 patches to put in this bank after 2 years having the
GX700?
No, I have hundreds of patches but the kind of sounds I like don't
usually coincide with those the people like, so...

/|* PEACE *|\

(What represents this?)
I don't know, I'm simply bored ^_^

////////////////////////////////////////////////
/ I will be very pleased if you send any bank  /
/ to my E-Mail to put in the site, thanks.     /
////////////////////////////////////////////////

------------------------------------------------------------------
Patch name: PseudoFender

Comment: 
This seems a twin reverb sound but it uses the JC-120 preamp. Nice clean preamp sim.

Chain:  (upper case means the FX is turned on)
-CS-wah-ds-PRE-loop-eq-SP-NS-mod-dly-ch-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 43
Release = 20
Tone = 79
LEVEL = 80

* PREAMP *
Type = JC-120
Volume = 51
Bass = 47
Middle = 61
Treble = 89
Presence = 74
Bright = ON
Gain = Low
MASTER = 48

* SPEAKER SIM *
Type = BtIn1
Mic setting = 3
Mic LEVEL = 67
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 17
Release = 0
LEVEL = 100

* REVERB *
Type = Plate
Reverb time = 3.5s
Predelay = 75ms
Low cut = FLAT
High cut = 10.0 kHz
Diffusion = 10
Effect LEVEL = 48
Direct LEVEL = 100

* Assign #1 *
Target = BYPASS
MIN = OFF
MAX = ON
Source =MIDI Ctrl #64
Mode = TOGGLE
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #3 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #10
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #4 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

------------------------------------------------------------------
Patch name: BrigthChorus

Comment: 
Bright clean sound. It will sound creap if you use amplifiers with your GX-700.

Chain:  (upper case means the FX is turned on)
-CS-wah-ds-PRE-loop-eq-SP-ns-mod-CH-DLY-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 50
Release = 21
Tone = 100
LEVEL = 40

* PREAMP *
Type = JC-120
Volume = 60
Bass = 30
Middle = 60
Treble = 80
Presence = 100
Bright = OFF
Gain = Low
MASTER = 50

* SPEAKER SIM *
Type = JC120
Mic setting = 3
Mic LEVEL = 100
Direct LEVEL = 0

* DELAY *
Mode = Normal
Time Center = 400ms
Time Left = 85%
Time Right = 115%
Feedback = 45
Level Center = 40
Level Left = 70
Level Right = 75
High damp = -24
High cut = 5.00 kHz
Smooth = ON
Effect LEVEL = 30
Direct LEVEL = 90

* CHORUS *
Mode = Stereo
Predelay = 2.5s
Low cut = 165 Hz
High cut = FLAT
LFO Waveform = T5:S5
LEVEL = 85

* REVERB *
Type = Hall1
Reverb time = 4.0s
Predelay = 20ms
Low cut = FLAT
High cut = FLAT
Diffusion = 10
Effect LEVEL = 70
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Dark Chorus

Comment: 
Clean chorused sound. I like a lot this one.

Chain:  (upper case means the FX is turned on)
-CS-EQ-wah-ds-PRE-loop-SP-NS-mod-CH-DLY-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 52
Release = 21
Tone = 100
LEVEL = 40

* PREAMP *
Type = JC-120
Volume = 60
Bass = 30
Middle = 60
Treble = 80
Presence = 50
Bright = ON
Gain = Low
MASTER = 50

* EQ *
Low Gain = -5
Mid Freq = 500 Hz
Middle Gain = -10
Middle Q = 3
High Gain = -18
LEVEL = 2

* SPEAKER SIM *
Type = MsSt1
Mic setting = 2
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* DELAY *
Mode = Normal
Time Center = 400ms
Time Left = 85%
Time Right = 115%
Feedback = 50
Level Center = 40
Level Left = 70
Level Right = 75
High damp = -26
High cut = 6.30 kHz
Smooth = ON
Effect LEVEL = 30
Direct LEVEL = 90

* CHORUS *
Mode = Stereo
Predelay = 2.5s
Low cut = 165 Hz
High cut = FLAT
LFO Waveform = T5:S5
LEVEL = 85

* REVERB *
Type = Hall1
Reverb time = 4.0s
Predelay = 20ms
Low cut = FLAT
High cut = FLAT
Diffusion = 10
Effect LEVEL = 70
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: TansientWave

Comment: 
Psychedelic sound with a lot of acoustic ambience. Transient Waves is a space-rock band I like.

Chain:  (upper case means the FX is turned on)
-CS-wah-DS-PRE-loop-eq-SP-NS-MOD-CH-DLY-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 61
Release = 7
Tone = 50
LEVEL = 42

* OD/DIST *
Type = Metal
Drive = 85
Bass = 0
Treble = 0
LEVEL = 80

* PREAMP *
Type = JC-120
Volume = 16
Bass = 25
Middle = 50
Treble = 20
Presence = 26
Bright = OFF
Gain = High
MASTER = 42

* SPEAKER SIM *
Type = BtIn1
Mic setting = 2
Mic LEVEL = 30
Direct LEVEL = 70

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* MODULATION *
Effect = Flngr
Rate = 26
Depht = 92
Manual = 42
Resonance = -5
Separation = 10
Gate = Off

* DELAY *
Mode = Normal
Time Center = 412ms
Time Left = 60%
Time Right = 130%
Feedback = 75
Level Center = 54
Level Left = 25
Level Right = 22
High damp = -12
High cut = FLAT
Smooth = ON
Effect LEVEL = 100
Direct LEVEL = 100

* CHORUS *
Mode = Stereo
Predelay = 2.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = T0:S10
LEVEL = 100

* REVERB *
Type = Plate
Reverb time = 10.0s
Predelay = 100ms
Low cut = FLAT
High cut = FLAT
Diffusion = 5
Effect LEVEL = 45
Direct LEVEL = 100

Assign #1 not active

Assign #2 not active

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Jimmy Lives!

Comment: 
An auto wah in your life is a great thing.

Chain:  (upper case means the FX is turned on)
-CS-WAH-ds-PRE-loop-EQ-SP-NS-mod-DLY-CH-pn-RV

* COMP/LIMIT *
Mode = Compressor
Sustain = 50
Attack = 20
Tone = 100
LEVEL = 50

* WAH *
Mode = Auto-Wah
Polarity = DOWN
Sens = 14
Manual = 60
Rate = 75
Depht = 25
Peak = 45
LEVEL = 50

* PREAMP *
Type = Match Drive
Volume = 100
Bass = 35
Middle = 50
Treble = 80
Presence = 75
Gain = Mid
MASTER = 32

* EQ *
Low Gain = -12
Mid Freq = 1.00 kHz
Middle Gain = -2
Middle Q = 1
High Gain = 15
LEVEL = 5

* SPEAKER SIM *
Type = MsSt2
Mic setting = 1
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* DELAY *
Mode = Normal
Time Center = 396ms
Time Left = 125%
Time Right = 80%
Feedback = 32
Level Center = 50
Level Left = 35
Level Right = 40
High damp = -10
High cut = 3.15 kHz
Smooth = ON
Effect LEVEL = 40
Direct LEVEL = 100

* CHORUS *
Mode = Stereo
Predelay = 3.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = 0
LEVEL = 50

* REVERB *
Type = Plate
Reverb time = 2.8s
Predelay = 0ms
Low cut = 165 Hz
High cut = 5.00 kHz
Diffusion = 6
Effect LEVEL = 20
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Solo IV

Comment: 
Nice for bluesy solos.

Chain:  (upper case means the FX is turned on)
-CS-wah-ds-PRE-loop-EQ-SP-NS-mod-DLY-CH-pn-RV

* COMP/LIMIT *
Mode = Compressor
Sustain = 50
Attack = 20
Tone = 100
LEVEL = 50

* PREAMP *
Type = Match Drive
Volume = 100
Bass = 40
Middle = 45
Treble = 74
Presence = 75
Gain = High
MASTER = 32

* EQ *
Low Gain = -12
Mid Freq = 1.00 kHz
Middle Gain = -2
Middle Q = 1
High Gain = 18
LEVEL = 5

* SPEAKER SIM *
Type = Midle
Mic setting = 2
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* DELAY *
Mode = Normal
Time Center = 396ms
Time Left = 125%
Time Right = 80%
Feedback = 35
Level Center = 50
Level Left = 35
Level Right = 40
High damp = -10
High cut = 3.15 kHz
Smooth = ON
Effect LEVEL = 50
Direct LEVEL = 100

* CHORUS *
Mode = Stereo
Predelay = 3.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = 0
LEVEL = 50

* REVERB *
Type = Plate
Reverb time = 2.8s
Predelay = 0ms
Low cut = 165 Hz
High cut = 5.00 kHz
Diffusion = 10
Effect LEVEL = 25
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: DC6 Flanger

Comment: 
Wanna flange?

Chain:  (upper case means the FX is turned on)
-CS-wah-DS-pre-loop-MOD-EQ-SP-NS-DLY-CH-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 85
Release = 21
Tone = 50
LEVEL = 25

* OD/DIST *
Type = Metal
Drive = 100
Bass = -10
Treble = 0
LEVEL = 60

* EQ *
Low Gain = -2
Mid Freq = 1.00 kHz
Middle Gain = -6
Middle Q = 5
High Gain = 14
LEVEL = -2

* SPEAKER SIM *
Type = MsSt1
Mic setting = 4
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* MODULATION *
Effect = Flngr
Rate = 19
Depht = 20
Manual = 100
Resonance = 0
Separation = 0
Gate = Off

* DELAY *
Mode = Normal
Time Center = 420ms
Time Left = 125%
Time Right = 80%
Feedback = 52
Level Center = 50
Level Left = 35
Level Right = 40
High damp = -12
High cut = 5.00 kHz
Smooth = ON
Effect LEVEL = 56
Direct LEVEL = 100

* CHORUS *
Mode = Stereo
Predelay = 3.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = T9:S1
LEVEL = 51

* REVERB *
Type = Plate
Reverb time = 5.0s
Predelay = 0ms
Low cut = 55 Hz
High cut = FLAT
Diffusion = 10
Effect LEVEL = 12
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Virtual Bass

Comment: 
Well... I'm not claiming this seems a real bass!

Chain:  (upper case means the FX is turned on)
-CS-wah-ds-PRE-loop-eq-SP-ns-MOD-CH-dly-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 50
Release = 21
Tone = 100
LEVEL = 40

* PREAMP *
Type = JC-120
Volume = 60
Bass = 30
Middle = 60
Treble = 80
Presence = 100
Bright = OFF
Gain = Low
MASTER = 60

* SPEAKER SIM *
Type = JC120
Mic setting = 2
Mic LEVEL = 100
Direct LEVEL = 0

* MODULATION *
Effect = Pitch
Type = Mono
Pitch 1 = 12
Pitch 2 = 12
Pitch 3 = 48
Fine 1 = 0
Fine 2 = 0
Fine 3 = 0
Pan 1 = 50:50
Pan 2 = 100:0
Pan 3 = 0:100
Level 1 = 100
Level 2 = 0
Level 3 = 0
Balance = 0:100
Total LEVEL = 100

* CHORUS *
Mode = Stereo
Predelay = 2.5s
Low cut = 165 Hz
High cut = FLAT
LFO Waveform = T5:S5
LEVEL = 85

* REVERB *
Type = Hall1
Reverb time = 4.0s
Predelay = 20ms
Low cut = FLAT
High cut = FLAT
Diffusion = 10
Effect LEVEL = 70
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Pink Floyd 2

Comment: 
Another dream-like patch. Sounds like if the noise is coming from very far.

Chain:  (upper case means the FX is turned on)
-CS-EQ-wah-ds-PRE-loop-SP-NS-MOD-CH-pn-DLY-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 64
Release = 21
Tone = 100
LEVEL = 40

* PREAMP *
Type = Match Drive
Volume = 40
Bass = 40
Middle = 60
Treble = 100
Presence = 20
Gain = High
MASTER = 50

* EQ *
Low Gain = -6
Mid Freq = 500 Hz
Middle Gain = -16
Middle Q = 2
High Gain = 0
LEVEL = 0

* SPEAKER SIM *
Type = MsSt1
Mic setting = 1
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 100

* MODULATION *
Effect = RingM
Frequency = INT
Effect LEVEL = 6
Direct LEVEL = 4

* DELAY *
Mode = Normal
Time Center = 442ms
Time Left = 85%
Time Right = 115%
Feedback = 60
Level Center = 40
Level Left = 75
Level Right = 75
High damp = -22
High cut = 6.30 kHz
Smooth = ON
Effect LEVEL = 45
Direct LEVEL = 90

* CHORUS *
Mode = Mono
Predelay = 2.0s
Low cut = 165 Hz
High cut = FLAT
LFO Waveform = T2:S8
LEVEL = 100

* REVERB *
Type = Plate
Reverb time = 4.0s
Predelay = 20ms
Low cut = FLAT
High cut = FLAT
Diffusion = 10
Effect LEVEL = 50
Direct LEVEL = 100

* Assign #1 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

Assign #3 not active

Assign #4 not active

------------------------------------------------------------------
Patch name: Init Patch

Comment: 
This is my propose for using as "init patch" (save it as "INIT.GX7" in the program folder).

Chain:  (upper case means the FX is turned on)
-cs-wah-ds-pre-loop-eq-sp-ns-mod-ch-pn-dly-rv

* Assign #1 *
Target = BYPASS
MIN = OFF
MAX = ON
Source =MIDI Ctrl #64
Mode = TOGGLE
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #3 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #10
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #4 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

------------------------------------------------------------------
Patch name: Galactica

Comment: 
MetalZone + BuiltIn3 + NSThres 55 + PitchShift + MedDelay + MonoChorus 95 + Plate = Autocoment.

Chain:  (upper case means the FX is turned on)
-cs-wah-DS-pre-loop-eq-SP-NS-MOD-DLY-CH-pn-RV

* OD/DIST *
Type = Metal
Drive = 85
Bass = -3
Treble = 8
LEVEL = 70

* SPEAKER SIM *
Type = BtIn3
Mic setting = 3
Mic LEVEL = 100
Direct LEVEL = 0

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 17
Release = 0
LEVEL = 100

* MODULATION *
Effect = Pitch
Type = Mono
Pitch 1 = 12
Pitch 2 = 24
Pitch 3 = 24
Fine 1 = 0
Fine 2 = 0
Fine 3 = 0
Pan 1 = 0:100
Pan 2 = 100:0
Pan 3 = 0:100
Level 1 = 100
Level 2 = 100
Level 3 = 0
Balance = 0:100
Total LEVEL = 100

* DELAY *
Mode = Normal
Time Center = 562ms
Time Left = 83%
Time Right = 121%
Feedback = 46
Level Center = 24
Level Left = 37
Level Right = 36
High damp = -15
High cut = FLAT
Smooth = OFF
Effect LEVEL = 64
Direct LEVEL = 100

* CHORUS *
Mode = Mono
Predelay = 0.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = 0
LEVEL = 95

* REVERB *
Type = Plate
Reverb time = 5.0s
Predelay = 75ms
Low cut = FLAT
High cut = 10.0 kHz
Diffusion = 10
Effect LEVEL = 48
Direct LEVEL = 100

* Assign #1 *
Target = BYPASS
MIN = OFF
MAX = ON
Source =MIDI Ctrl #64
Mode = TOGGLE
Act LO = 0
Act HI = 127

* Assign #2 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #7
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #3 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =MIDI Ctrl #10
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #4 *
Target = NS :LEVEL
MIN = 0
MAX = 100
Source =Expression pedal
Mode = NORMAL
Act LO = 0
Act HI = 127

------------------------------------------------------------------
Patch name: ExpPointEQrs

Comment: 
2.1: Use the experimentation point plug' with this and hear that resonance sound produced by the EQ.

Chain:  (upper case means the FX is turned on)
-CS-wah-DS-pre-loop-EQ-sp-NS-MOD-CH-DLY-pn-RV

* COMP/LIMIT *
Mode = Limiter
Threshold = 61
Release = 7
Tone = 50
LEVEL = 40

* OD/DIST *
Type = Metal
Drive = 100
Bass = 0
Treble = 6
LEVEL = 72

* EQ *
Low Gain = 5
Mid Freq = 10.0 kHz
Middle Gain = 10
Middle Q = 2
High Gain = 4
LEVEL = -1

* NOISE SUPRESSOR *
Detect = NS IN
Threshold = 15
Release = 0
LEVEL = 80

* MODULATION *
Effect = Flngr
Rate = 26
Depht = 92
Manual = 42
Resonance = -5
Separation = 10
Gate = Off

* DELAY *
Mode = Normal
Time Center = 412ms
Time Left = 60%
Time Right = 130%
Feedback = 75
Level Center = 54
Level Left = 25
Level Right = 22
High damp = -12
High cut = FLAT
Smooth = ON
Effect LEVEL = 95
Direct LEVEL = 96

* CHORUS *
Mode = Stereo
Predelay = 2.0s
Low cut = FLAT
High cut = FLAT
LFO Waveform = T0:S10
LEVEL = 100

* REVERB *
Type = Plate
Reverb time = 10.0s
Predelay = 100ms
Low cut = FLAT
High cut = FLAT
Diffusion = 5
Effect LEVEL = 43
Direct LEVEL = 98

* Assign #1 *
Target = EQ :MID FREQ
MIN = 100 Hz
MAX = 10.0 kHz
Source =MIDI Ctrl #12
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #2 *
Target = EQ :MID GAIN
MIN = 0
MAX = 15
Source =MIDI Ctrl #13
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #3 *
Target = EQ :LOW GAIN
MIN = -10
MAX = 10
Source =MIDI Ctrl #14
Mode = NORMAL
Act LO = 0
Act HI = 127

* Assign #4 *
Target = EQ :HI GAIN
MIN = -10
MAX = 10
Source =MIDI Ctrl #15
Mode = NORMAL
Act LO = 0
Act HI = 127


_______________________________________________

ASCII file generated by GX700 SoundStation v3.1